Flanged Metal Shielded Deep Groove Ball Bearings: Manufactured to the same principal sizes as standard bearings but fitted with metal shields, these bearings have an additional flange to allow fitting into housings flush against the shoulder of the flange. They are often used on steel tracks as guides and supports. The shields serve to offer protection to prevent ingress of debris and dust whilst retaining the grease within the bearing.
Benefits: Cost effective replacement bearing, Flanged design, Metal shielded
Flanged Radial Bearings like these are also used within machines like 3D Printers that have timing belts, and allow the belt to move and rotate while the edge holds the belt in place and keeps it from sliding off. Typically, two of these bearings will be used together to keep belts centred, but double-flanged bearings can also be used instead.
| Bearing Type | Ball |
| For Load Direction | Radial |
| Construction | Single Row |
| Seal Type | Shielded |
| Part Number | F606ZZ |
| For Shaft Diameter | 6mm |
| Bore Dia (d) | 6mm |
| Bore Dia Tolerance | -0.008mm to 0 |
| For Housing ID | 17mm |
| Outer Dia (D) | 17mm |
| Outer Dia Tolerance | -0.008mm to 0 |
| Width (B) | 6mm |
| Width Tolerance | -0.12mm to 0 |
| Flange Outer Dia. | 19mm |
| Flange Thickness | 1.2mm |
| Ring Material | 52100 Chrome steel |
| Ball Material | 52100 Chrome steel |
| Cage Material | 300 Series Stainless Steel |
| Shield Material | 300 Series Stainless Steel |
| Dynamic Load Rating (Cr) (Newtons) | 1924 |
| Static Load Rating (Cor) (Newtons) | 677 |
| Max Speed (Grease) (X1000 RPM) | 38 |
| Max Speed (Oil) (X1000 RPM) | 43 |
| Lubrication | Required |
| Shaft Mount Type | Press Fit |
| Temperature Range | -30° to 110 °C |
| ABEC Rating | ABEC-3 |
| Radial Clearance Trade No. | C0 |
| Radial Clearance | 0.002mm to 0.013mm |
| RoHS | Compliant |
| Ball Qty | 6 |
| Ball Dia | 3.5000mm |
| Weight (grams) | 7.42 |
1 Applicable only for open, single Z, ZZ, single RU and 2RU types in inner ring rotating conditions. Max. speeds for the contact rubber seal(s) types will be around 50-60 % of above values.
2 Applicable only for open, single Z, ZZ, single RU and 2RU types in inner ring rotating conditions. Max. speeds for the contact rubber seal(s) types will be around 50-60 % of above values.
Request for Quotation
