Assembled with multi-busbar PERC cells, the half-cell configuration of the modules offers the advantages of higher power output, better temperature-dependent performance, reduced shading effect on the energy generation, lower risk of hot spot, as well as enhanced tolerance for mechanical loading.
Assembled with multi-busbar PERC cells, the half-cell configuration of the modules offers the advantages of higher power output, better temperature-dependent performance, reduced shading effect on the energy generation, lower risk of hot spot, as well as enhanced tolerance for mechanical loading.
1.Assembled with multi-busbar PERC cells,the half-cell configuration of the modules offers the advantages of higher power output,reduces BOS cost effectively;
2.Special half-cell design reduces the energy loss caused by shadows,better anti-shading performance;
3.Lower hot spot risks due to half-cell layout,offers an additional level of safety;
4.1500V DC voltage of the system,reducing the cost of the system side;
5.The overflow tank is waterproof with double layers,and the cross section contains hooked aluminum frame,which enhances the mechanical load strength by 10%;
6.Passed the certification test of 5400 Pa snow load and 2400 Pa wind load;
1.IP68 junction box and connector have a high degree of waterproof, effectively resist the harsh environment
2.The junction box carries a current of 15A, ensuring high current flow through the modules
3.Glue-spilled tank has a double-layer waterproof, cross-section with hook-shaped aluminum frame, enhanced by 10% of the mechanical load strength
4.The module refines the current division, thus effectively reducing the loss of up to 2% due to mismatch and increasing the power output of the system
5.Excellent salt spray resistance, anti-ammonia and anti PID, TUV, SUD certification approved
6.Passed the 2400pa wind load and 5400pa snow load test, ensuring that the module has a stable mechanical life
7.Modules are packaged according to color classification, to achieve consistent appearance after installation
With 182mm Bifacial Solar Monocrystalline Silicon Tarnsparent MBB Module Panel, Sunpal BiMAX5 144 Cell Series Solar Panel Power Range 515W 520W 525W 530W 535W.
182mm 470-490W Bifacial Mono MBB Half Cut Cell Solar Photovoltaic Module, Sunpal BiMAX5 132 Cell Series Solar Panel Power Range 470W 475W 480W 485W 490W.
Assembled with multi-busbar PERC cells, the half-cell configuration of the modules offers the advantages of higher power output, better temperature-dependent performance, reduced shading effect on the energy generation, lower risk of hot spot, as well as enhanced tolerance for mechanical loading.
120 Half Cell Dual Glass Multi Busbar Solar Photovoltaic Module, Sunpal BiMAX4 120 Cell Series Solar Panel Power Range 350W 355W 360W 365W 370W 375W 380W.
