Feature:
4MPPT input,more flexible configuration
APF mode,improved grid power quality
Diversified work patterns and rapid gains
Full digital control,higher control accuracy
Multiple parallel systems,more flexible system solutions
Off-grid output can be connected to unbalanced load,three-phase separate output is supported
Specification
| Datasheet | HYD10000TL-3PH | HYD15000TL-3PH | HYD20000TL-3PH |
| Battery Input Data | |||
| Battery type | Li-lon | ||
| No. of battery input | 2 | 2 | 2 |
| Battery voltage range | 180-800V | ||
| Battery voltage range for full load | 200V-800V | 300V-800V | 400V-800V |
| Nominal charging/discharging power | 10000W | 15000W | 20000W |
| Max. charging/discharging current | 50A(25A/25A) | ||
| Peak charging/discharging current, Duration | 70A(35A/35A), 60s | ||
| Charging strategy for battery | Self-adaption to BMS | ||
| Communication interfaces | CAN(RS485) | ||
| PV String Input Data | |||
| Recommended Max. PV input power | 15000Wp(7500Wp/7500Wp) | 22500Wp(11250Wp/11250Wp) | 30000Wp(15000Wp/15000Wp) |
| Max. DC voltage | 1000V | ||
| Start-up operating voltage | 200V | ||
| MPPT voltage range | 180V-960V | ||
| Nominal DC voltage | 600V | ||
| Full power MPPT voltage range | 250V-850V | 360V-850V | 220V-850V |
| Max. input current | 12.5A/12.5A | 12.5A/12.5A | 25A/25A |
| Max. short current | 15A/15A | 15A/15A | 30A/30A |
| No. of MPP trackers | 2 | ||
| No. of strings per MPP tracker | 2 | 2 | 2 |
| AC Output Data (On-grid) | |||
| Nominal grid voltage | 3/N/PE, 220/380Vac, 230/400Vac | ||
| Grid voltage range | 184Vac~276Vac | ||
| Nominal grid frequency | 50/60Hz | ||
| Grid frequency range | 45Hz~55Hz/55Hz~65Hz | ||
| Output power factor | ~1(0.8 leading to 0.8 lagging) | ||
| Output THDi (@Nominal output) | <3% | ||
| AC Output Data (Back-up) | |||
| Nominal output power | 10000W | 15000W | 20000W |
| Max. output power | 10000VA | 15000VA | 20000VA |
| Peak output power, Duration | 20000VA, 60s | ||
| Max. output current | 16A | 24A | 32A |
| Peak output current, Duration | 30A, 60s | 32A, 60s | 32A, 60s |
| Nominal output voltage | 3/N/PE, 220/380Vac, 230/400Vac | ||
| Nominal output frequency | 50/60Hz | ||
| Output THDv (@Liner load) | <3% | ||
| Switch time | <20ms | ||
| Efficiency | 99.90% | ||
| MPPT efficiency | 97.50% | 97.50% | 97.70% |
| Max. efficiency | 98% | 98% | 98.20% |
| Max. battery charge/discharge efficiency | 97.60% | 97.60% | 97.80% |
| Protection | |||
| DC switch | Yes | ||
| PV reverse polarity protection | Yes | ||
| Output over current protection | Yes | ||
| Output over voltage protection | Yes | ||
| Anti-islanding protection | Yes | ||
| Residual current detection | Yes | ||
| Insulation resistor detection | Yes | ||
| Surge protection level | II | ||
| Battery reverse protection | Yes | ||
| General Data | |||
| Inverter topology | Transformerless | ||
| Standby self-consumption | <15W | ||
| Operating temperature range | -30ºC~+60ºC | ||
| Relative humidity | 0~100% | ||
| Noise | <45dB | ||
| Operating altitude | <4000m | ||
| Cooling | Natural | Natural | Forced airflow |
| Protection degree | IP65 | ||
| Feature | |||
| DC terminal | MC4 | ||
| Grid AC terminal | 5P Connector | ||
| Back-up AC terminal | 5P Connector | ||
| Monitoring interfaces | LCD Display | ||
| Monitoring interfaces | Bluetooth / RS485 / WIFI / GPRS (optional) | ||
| Parallel operation | Yes | ||
| Standard warranty | Standard 5 years | ||
| Certifications & Standards | |||
| EMC | c | ||
| Safety | EN61000-6-1, EN61000-6-3 | ||
| Grid | AS/NZS 4777, VDE V 0124-100, V0126-1-1, VDE-AR-N 4105, CEI 0-21, EN50549, G98/G99, UTE C15-712-1 | ||
Packing
Projects
Request for Quotation
