Roller bearings are used in all main shaft and auxiliary drive shaft applications to support pure radial load, and allow for axial shaft elongation due to temperature changes with no additional load effect on the bearing.
four-row
cylindrical roller bearings for steel industry
+30years
working with steel industry
compatible
for rolling mill stands of Primetal, Danieli, SMS, etc.
widely
used in steel rolling mills
OEM
service
contact
us for stock list
automatically corrected to
reduce excessive force to bearings;
carrying
large load rating capacity;
accommodating errors in housing
assembly and misalignments between the inner and outer rings;
professional manufacturer of bearings for
steel mills of billets, bars, sections, angles, beams, wire rods, coils, etc.
P6 precision for higher wear-resistance
best bearing steel to ensure the bearing
can work under highest loads
radial clearance is generally executed in
C3 or C4
ready stock available
600 °C R188 Zro2 full balls ceramic bearing with size 6.35*12.7mm *3.18mm ,this bearing are produce with full balls ,and with material ceramic ZrO2 and PTFE cage,which can working at temperature at 600 degree .
VW series roller bearing according to difference of seal type can be divided into iron cover seal (no suffix, such as: W3) and rubber cover seal (name of X suffix, such as: W3X) two kinds
If using stainless steel material, the name will be the words with the SS, such as: W3SSX
higher rolling efficiency with inner rings remained onto
the rolls during processing;
stabilizing treatment allowing the bearings to work with
temperatures up to 150° C, without dimensional
change and distortion;
