Equivalent to amass connectors, XT90 conenctor perfect for applications up to 90A constant. It can be sold in pairs(female + male) or a single side(female or male).
Ethernet coupling connector is simply disassembled and assembled by locking the tail nut, so that the connector and the cable form a perfect fit, not easy to fall off, and its waterproof effect can achieve to IP67
MR30 battery connector is recommended for motor connector, 3-pin structure, gold-plated copper contacts, complete set consists of one male and one female and two protective covers
MR30 Motor to ESC connector is recommended for motor connector, 3-pin structure, gold-plated copper contacts, complete set consists of one male and one female and two protective covers
XT30U Lipo Power connector, its housing is made with PA and the contact is gold plated, its shape prevents reverse polarity, and when plugged in the connection is super-solid. Advantages: low resistance, slow heating, anti-reverse insertion
XT90H ESC And Charger Lead Conenctor perfect for applications up to 90A constant. It can be equipped with a cap.It is equipped with a protective cover, which will not expose the solder joints, making it safe and reliable to use,Free samples available.
One pair of 3 Input 1 Out T-Branch Connectors for solar panels.Waterproof Grade IP67, Can Be Used Outdoors, With A Buckle Design, It Is Not Easy To Fall Off By Itself During Work.
MC4 Y Branch Connectors are 2 to 1 connectors that allow for a safe and simple parallel or serial-parallel connection of PV modules. Available in either 2 female to 1 male, or 2 male to 1 female, and pluggable with single-pole MC4 connectors
The MC4 Photovoltaic
Connector Is The Most Used Special Connector In The Solar
Photovoltaic Power Generation System, And It Is An Indispensable And Important
Component Of The Solar Power Generation System.The Connection Is Reliable, And
It Is Not Easy To Fall Off During Work. Easy Maintenance.
Panel-Mounted PV Bulkhead Connectors Are Mainly Used In The Internal And
External Wiring Of The Photovoltaic Junction Box. Use Bulkhead Solar Connectors For Coupling And Wiring, Which Is More Convenient To Connect And Disconnect The
Circuit Of The Junction Box.
The EVO2 MC4 Connector Can Support Wires Of <10AWG (6mm2) And Has A Rated Withstand Voltage Of 1500V. It Is The Most Used Connector In Photovoltaic Systems. Can Be Made Into Cable Assemblies As Required.
Micro Resistance Painless Lever Crimp Wire Connectors With The Latest
Design Inside The Product, Lever Has Minimal Opening And Closing Resistance,
And Frequent Use Will Not Bring Pain To The Fingertips. After The Wire Is
Connected, The Tension Is Large And It Is Not Easy To Loosen. The Number Of
Connector Holes Can Be Spliced Infinitely According To Requirements.
The Newly Designed Lever Crimp Connector Of The Internal Structure Can Be Spliced In Multiple Positions. A Single Product Can Have 1-In, 1-Out And 1-In And Multiple-Out Structures At The Same Time, And Can Be Used With Rail Brackets.
The Lever-Type Plug-In Terminal Block Has A New
Internal Design, The Lever Handle Has No Resistance To Open And Close, And The
Wiring Is More Labor-Saving; The Splicable Structure, The Number Of Digits Can
Be Spliced Infinitely; No Male-Female Design, Which Can Reduce The Procurement
Specifications; The Wiring Is More Convenient, And The Plug-In Fast.
The Lever-Type Non-Screw Terminal Block Can Withstand 250V32A Power, The
Spacing Is 5mm, And The DIP Type Is Welded On The PCB Board, Which Is Very
Suitable For Use In Switching Power Supply And Other Wiring Devices That
Require High Current And High Power Input And Output.
