INTRODUCTION
This solar pump system is composed of solar cell array, soalr water pump inverter, AC water pump, water storage device and AC powerpack,etc. It uses solar energy as power source to directly draw water from deep wells, rivers, rivers, lakes and other water sources through water pumps.
The system is composed of solar panels, Solar Off-grid Inverter, MPPT charge controller and battery pack.
Solar off-grid inverter is the core device of solar power system, it converts DC power produced by solar panels to AC power to provide electric energy for appliances. MPPT charge controller
charges the solar electricity into batteries. When solar energy is not enough for the loads, or at night, the battery pack will discharge to replenish energy for loads.
6310-2RS (I.D.=50mm, O.D.=110mm, Thickness=27mm); 6310-2RS bearing are shielded on BOTH SIDES to keep lubricant in; Chromium Steel long-life bearings, smooth and low noise.
4192975 bearings are used in the Excavator Final drive system of Hitachi ：
4192975 BRG.;ROL. Hitachi parts 218HSL, 270C LC JD, CX350DR, EX200-5Z JPN, EX270, EX270-5, EX280H-5, EX300, EX300-2, EX300-3, EX300-5, EX300-5HHE, EX300LC-5M, EX300LCLL-5, EX300LCLL-5M, EX345USR(LC), EX350H-5, EX350H-5HHE, EX350K-5
MR106ZZ Miniature Shielded Bearing 6mm x 10mm x 3mm, the inner diameter is 6mm, outer diameter is 10mm and the width is 3mm, Bearing is made of Chrome Steel, each bearing has 2 Metal Sheilds to protect the bearing from dust or any possible contamination, also bearing is pre-lubricated with grease.
Single phase hybrid inverter ideal for new installation and retrofit exist solar system. Stunning IP65 protection level,more durable and flexible for installation, multiple programmable working modes, decide by yourself.
4219328 bearings are used in the Excavator Final drive system of Hitachi ：
4219328 BRG.;ROL. Hitachi parts EX700, EX750-5, EX800H-5, ZR900TS, ZX1000K-3, ZX800, ZX850-3, ZX850-3F, ZX850H, ZX850LC-3-DH, ZX870-5G, ZX870H-3, ZX870H-3-HCMC, ZX870H-3F, ZX870H-5G, ZX870LC-5B, ZX870LC-5G, ZX870LCH-5G, ZX870LCR-5G
Shengda Qianliang Aluminum has 26 years of experience in the production of aluminum profiles for electronic housings.
Can be extruded, anodized, electrophoresed, sandblasted, punched,CNC processing, riveting, silk screen.
Long-term Safe and Reliable Work
From 2009 to 2012, more than 6,000 MCU controllers of electric vehicle were running in nearly 20 cities including Hangzhou, Qingdao, Nanjing, Suzhou, Nantong, Xiamen, Haikou, Urumqi and Tianjin. The new energy bus worked safely and reliably for 6-8 years. The running mileage of each electric vehicle reaches 500,000 -700,000 kilometers.
F608-2RS bearing is a flanged ball bearing made of chrome steel in which the bearing is metal shield from both sides It has an 8mm inner diameter, a 22mm outer diameter, a 7mm thickness, and an 25mm flange.
Rapid prototyping via CNC machining delivers high speed, high precision, and robust rapid part manufacturing solutions. You take a block or billet of material and cut away at it with a series of tools and drill bits, removing material to make CNC machined parts or products.
