XKAH-00340 bearings are used in the final drive Bearing system of HYUNDAI heavy machinery equipment：
XKAH-00340 HYUNDAI BEARING parts
Apply to R140LC-7, R140LC-7A, R160LC7, R160LC7A
We import big blocks of good quality onyx stone from Iran and cut them to big slabs with Chinese competitive labor cost and advanced fabrication machines. Normally, natural onyx dimensions could be 32000*1900mm as the biggest, which, however, is still not enough for bigger area. To solve this, we can polish different sides of slabs in the same block, so as to realize book match effect for bigger area paving.
This is popular white calacatta composite quartz slab, with grey vein. The whole slab top is simple in design, but it looks natural. The book-match for two slabs for bigger area is available. For Calacatta quartz slabs, we normally do thickness of 18mm, 20mm, and 30mm.
1. The toner cartridge can be plug and play, and the inside of the machine can be directly compatible with the machine to avoid powder waste or use of inferior powder to bring machine printing problems, which is more convenient to use.
2. A full, even toner helps to enhance printing and protect the machine.
3. The proportion of toner carrier is reasonable and more compatible with the use of copiers.
4. The printed finished product has good effect, and will not cause the printed table to have burrs, color casts, etc., and the writing of the document has high definition and smoothness.
5. For each product, we will perform multiple use tests. Use toner in the debug machine for various tests to better fit the model.
208-27-62110 bearings are used in the Excavator Final drive system of KOMATSU：
208-27-62110 BEARING KOMATSU parts PC550LC-8,PC400LC-6Z,PC400-6,PC600LC-7,PC600-8,PC600LC-6APC650LC-7
XKAH-00025bearings are used in the final drive Bearing system of HYUNDAI heavy machinery equipment：
XKAH-00025 HYUNDAI BEARING parts
Apply to R140LC-7, R210LC7, R210NLC7
4321887 bearings are used in the Excavator Final drive system of Hitachi ：
4321887 BRG.;ROL. Hitachi parts CHR70, EX100-2, EX100-3, EX100-3C, EX100-5, EX100-5 JPN, EX100M-5, EX120-2, EX120-3, EX120-3C, EX120-5, EX120-5 JPN, EX120-5HG, EX120-5LV JPN, EX120-5X, EX120-5Z, EX120K-2, EX120K-3, EX120SS-5, EX130H
We provide customized aluminum profiles for aluminum textile equipment manufacturers. Because of the special structure, we solve all production difficulties from the mold.
Proper amount of lubricant is not required to be cleaned before installation, and lubricant is not required to be added. When the jacking screw on the protruding end of the bearing inner ring is fastened on the shaft, the allowable axial load shall not exceed 20% of the rated dynamic load.
All kinds of surgical drapes for ophthalmic surgery, sterilized packaging, can be used directly. Single size specifications for ophthalmology can be based on hospital requirements.
Using rapid prototyping processing method,guarantees the tolerance,flatness,no burrs and dirt during processing.Various surface treatment effects can be made according to customer requirements.All products 100% inspected by QC and will make confirmation with customer before shipment.
