Assembled with multi-busbar PERC cells, the half-cell configuration of the modules offers the advantages of higher power output, better temperature-dependent performance, reduced shading effect on the energy generation, lower risk of hot spot, as well as enhanced tolerance for mechanical loading.
INTRODUCTION
Solar pumping inverter obtains DC electric energy from the photovoltaic cell and converts it into electric energy to drive the water pump. According to the intensity of sunlight, the inverter adopts MPPT algorithm to adjust the output frequency and make maximum use of solar energy.
This series solar pumping inverter is a flexible, easy-to use and economical solar pumping inverter launched
by Days energy according to the differentiated needs of customers. It aims to provide customers with economic and comprehensive economic benefit solutions.
Assembled with multi-busbar PERC cells, the half-cell configuration of the modules offers the advantages of higher power output, better temperature-dependent performance, reduced shading effect on the energy generation, lower risk of hot spot, as well as enhanced tolerance for mechanical loading.
Solar microporous aeration is a kind of water treatment system specially designed for water purification and water quality improvement of rivers and lakes.The use of solar energy as a power source, with low operating management cost, good effect of oxygen, large flow, anti-blocking, long life, low operating noise characteristics.Widely used in urban river, artificial lake, natural lake;Suitable for aquaculture, fish pond oxygen;In the practice of water body restoration, it has obvious effects on water body reoxygenation and water body circulation.
IP68 junction box and connector have a high degree of waterproof, effectively resist the harsh environment;
The junction box carries a current of 15A, ensuring high current flow through the modules;
*Solar energy storage inverter
*AC distribution box
*Energy storage battery unit *Battery management system (BMS)
*DC combiner box
*Fire protection & temperature control
1.IP68 junction box and connector have a high degree of waterproof, effectively resist the harsh environment;
2.The junction box carries a current of 15A, ensuring high current flow through the modules;
3.Glue-spilled tank has a double-layer waterproof, cross-section with hook-shaped aluminum frame, enhanced by 10% of the mechanical load strength;
4.The module refines the current division, thus effectively reducing the loss of up to 2% due to mismatch and increasing the power output of the system;
5.Excellent salt spray resistance, anti-ammonia and anti PID, TUV, SUD certification approved;
6.Passed the 2400pa wind load and 5400pa snow load test, ensuring that the module has a stable mechanical life;
7.Modules are packaged according to color classification, to achieve consistent appearance after installation.
Wide battery voltage range
Supports multiple battery inputs
Support MPPT function
Supports seamless switching between on-grid and off-grid
Integrated EMS, easy to set peak and valley time
Redundant Design of AC and DC Dual Auxiliary Power Supply
1.IP68 junction box and connector have a high degree of waterproof, effectively resist the harsh environment;
2.The junction box carries a current of 15A, ensuring high current flow through the modules;
3.Glue-spilled tank has a double-layer waterproof, cross-section with hook-shaped aluminum frame, enhanced by 10% of the mechanical load strength;
4.The module refines the current division, thus effectively reducing the loss of up to 2% due to mismatch and increasing the power output of the system;
5.Excellent salt spray resistance, anti-ammonia and anti PID, TUV, SUD certification approved;
6.Passed the 2400pa wind load and 5400pa snow load test, ensuring that the module has a stable mechanical life;
7.Modules are packaged according to color classification, to achieve consistent appearance after installation;
Solar off grid power system is composed of PV module, Solar Off grid inverter, and Battery pack.it converts DC power produced by solar panels to AC power to provide electric energy for applications. MPPT charge controller charge the solar electricity into batteries. When solar energy is not enough for loads, or at night, the battery pack will be discharge to replenish energy for loads.
1.IP68 junction box and connector have a high degree of waterproof, effectively resist the harsh environment;
2.The junction box carries a current of 15A, ensuring high current flow through the modules;
3.Glue-spilled tank has a double-layer waterproof, cross-section with hook-shaped aluminum frame, enhanced by 10% of the mechanical load strength;
4.The module refines the current division, thus effectively reducing the loss Of up to 2% due to mismatch and increasing the power output of the system;
5.Excellent salt spray resistance, anti-ammonia and anti PID, TUV, SUD certification approved;
6.Passed the 2400pa wind load and 5400pa snow load test, ensuring that the module has a stable mechanical life;
7.Modules are packaged according to color classification, to achieve consistent appearance after installation;
INTRODUCTION
solar air conditioners operate directly using solar energy and utility energy , no need battery.When the sun is shining, it is powered by the solar source completely; when the sun is weak, it is powered by the solar and utility together,the whole system with hybrid design,can work online sharing with solar and utility energy.
Application:
Areas without electricity, low power,unstable power grids,and high electricity prices where air conditioner is in demand.
1.IP68 junction box and connector have a high degree of waterproof, effectively resist the harsh environment
2.The junction box carries a current of 15A, ensuring high current flow through the modules
3.Glue-spilled tank has a double-layer waterproof, cross-section with hook-shaped aluminum frame, enhanced by 10% of the mechanical load strength
4.The module refines the current division, thus effectively reducing the loss of up to 2% due to mismatch and increasing the power output of the system
5.Excellent salt spray resistance, anti-ammonia and anti PID, TUV, SUD certification approved
6.Passed the 2400pa wind load and 5400pa snow load test, ensuring that the module has a stable mechanical life
7.Modules are packaged according to color classification, to achieve consistent appearance after installation
Wide battery voltage range
Supports multiple battery inputs
Support MPPT function
Supports seamless switching between on-grid and off-grid
Integrated EMS, easy to set peak and valley time
Redundant Design of AC and DC Dual Auxiliary Power Supply
1.IP68 junction box and connector have a high degree of waterproof, effectively resist the harsh environment
2.The junction box carries a current of 15A, ensuring high current flow through the modules
3.Glue-spilled tank has a double-layer waterproof, cross-section with hook-shaped aluminum frame, enhanced by 10% of the mechanical load strength
4.The module refines the current division, thus effectively reducing the loss of up to 2% due to mismatch and increasing the power output of the system
5.Excellent salt spray resistance, anti-ammonia and anti PID, TUV, SUD certification approved
6.Passed the 2400pa wind load and 5400pa snow load test, ensuring that the module has a stable mechanical life
7.Modules are packaged according to color classification, to achieve consistent appearance after installation
All in one household solar energy storage is a multifunctional intelligent energystorage inverter cabinet integrating inverter, AC charger, photovoltaic charge controllerand AC bypass. It has optional AC sources, an intelligent management system for ACchargers and solar charge controllers, and an energy management system for AC output,which guarantees customers' normal electricity consumption to the greatest extent andreduces the cost of customers' electricity consumption.
1.Assembled with multi-busbar PERC cells,the half-cell configuration of the modules offers the advantages of higher power output,reduces BOS cost effectively
2.Special half-cell design reduces the energy loss caused by shadows,better anti-shading performance;
3.Lower hot spot risks due to half-cell layout,offers an additional level of safety;
4.1500V DC voltage of the system,reducing the cost of the system side;
5.The overflow tank is waterproof with double layers,and the cross section contains hooked aluminum frame,which enhances the mechanical load strength by 10%;
6.Passed the certification test of 5400 Pa snow load and 2400 Pa wind load;
Wide battery voltage range
Supports multiple battery inputs
Support MPPT function
Supports seamless switching between on-grid and off-grid
Integrated EMS, easy to set peak and valley time
Redundant Design of AC and DC Dual Auxiliary Power Supply
1.Assembled with multi-busbar PERC cells,the half-cell configuration of the modules offers the advantages of higher power output,reduces BOS cost effectively
2.Special half-cell design reduces the energy loss caused by shadows,better anti-shading performance;
3.Lower hot spot risks due to half-cell layout,offers an additional level of safety;
4.1500V DC voltage of the system,reducing the cost of the system side;
5.The overflow tank is waterproof with double layers,and the cross section contains hooked aluminum frame,which enhances the mechanical load strength by 10%;
6.Passed the certification test of 5400 Pa snow load and 2400 Pa wind load;
All in one household solar energy storage is a multifunctional intelligent energystorage inverter cabinet integrating inverter, AC charger, photovoltaic charge controllerand AC bypass. It has optional AC sources, an intelligent management system for ACchargers and solar charge controllers, and an energy management system for AC output,which guarantees customers' normal electricity consumption to the greatest extent andreduces the cost of customers' electricity consumption.
