Body: Carbon steel,clear Zinc plated
SA..E: Mounted with GE..E type of radial spherical plain bearings
Sliding contact surfaces: Steel/Steel
Body: Carbon steel,clear Zinc plated
SA..E: Mounted with GE..E type of radial spherical plain bearings
Sliding contact surfaces: Steel/Steel
| Bearing No. | Dimensions(mm) |
Ball
dia
|
a0
mis.
angle
|
Load ratings
(KN)
|
Weight
≈ kg
|
|||||||||
| d | B | C1 | d2 | d3-6g | h | L1 | L2 | L7 | Dynamic | Static | ||||
| SA5E1) | 5 | 6 | 4.5 | 21 | M5 | 36 | 16 | 46.5 | 12 | 10 | 13 | 3.4 | 4.6 | 0.017 |
| SA6E1) | 6 | 6 | 4.5 | 21 | M6 | 36 | 16 | 46.5 | 12 | 10 | 13 | 3.4 | 6.9 | 0.017 |
| SA8E1) | 8 | 8 | 6.5 | 24 | M8 | 42 | 21 | 54 | 13 | 13 | 15 | 5.5 | 12.9 | 0.029 |
| SA10E1) | 10 | 9 | 7.5 | 29 | M10 | 48 | 26 | 62.5 | 16 | 16 | 12 | 8.1 | 17.6 | 0.044 |
| SA12E1) | 12 | 10 | 8.5 | 34 | M12 | 54 | 28 | 71 | 18 | 18 | 10 | 10 | 24.5 | 0.066 |
| SA15ES | 15 | 12 | 10.5 | 40 | M14 | 63 | 34 | 83 | 22 | 22 | 8 | 16 | 36 | 0.121 |
| SA17ES | 17 | 14 | 11.5 | 46 | M16 | 69 | 36 | 92 | 24 | 25 | 10 | 21 | 45 | 0.172 |
| SA20ES | 20 | 16 | 13.5 | 53 | M 20x1.5 | 78 | 43 | 104.5 | 27 | 29 | 9 | 30 | 60 | 0.283 |
| SA25ES | 25 | 20 | 18 | 64 | M24x2 | 94 | 53 | 126 | 33 | 35.5 | 7 | 48 | 83 | 0.504 |
| SA30ES | 30 | 22 | 20 | 73 | M30x2 | 110 | 65 | 146.5 | 37.5 | 40.7 | 6 | 62 | 110 | 0.835 |
| SA35ES | 35 | 25 | 22 | 82 | M36x3 | 140 | 82 | 181 | 41 | 47 | 6 | 79 | 146 | 1.41 |
| SA40ES | 40 | 28 | 24 | 92 | M39x3 | 150 | 86 | 196 | 47 | 53 | 7 | 99 | 180 | 1.86 |
| SA45ES | 45 | 32 | 28 | 102 | M42x3 | 163 | 92 | 214 | 52 | 60 | 7 | 127 | 240 | 2.57 |
| SA50ES | 50 | 35 | 31 | 112 | M45x3 | 185 | 104 | 241 | 60 | 66 | 6 | 156 | 290 | 3.58 |
| SA60ES | 60 | 44 | 39 | 135 | M52x3 | 210 | 115 | 277.5 | 75.5 | 80 | 6 | 245 | 450 | 5.73 |
| SA70ES | 70 | 49 | 43 | 160 | M56x4 | 235 | 125 | 315 | 95 | 92 | 6 | 313 | 610 | 7.94 |
| SA80ES | 80 | 55 | 48 | 180 | M64x4 | 270 | 140 | 360 | 105.5 | 105 | 6 | 400 | 750 | 12.06 |
Can not be relubricated.
Can supply rod ends with different pitch or accuracy of thread.
For left-hand thread, suffix "L" is added to bearing numbers. e.g.:SAL20ES M20×1.5L-6g:
Request for Quotation
