Automatic Double Color Melamine Crockery Making Machine-DTS 200TONS

Features

1. Using advanced technology, low energy consumption, low noise, high speed, high efficiency

2. The movable beam has safety limiters in the up and down directions

3. This hydraulic machine is equipped with a photoelectric protection device to ensure safe operation

4. With automatic and manual functions, can be freely converted

5. Two operation modes: pressure adjustment and stroke adjustment, which can be selected through the operation panel, with pressure holding and delay

Four Steps to Install Molds on Melamine Ware Making Machine

Preparation： Check whether the mold specifications are suitable for installation on the heating plate of the machine model

1. If the mold is tall, you can loosen the nut on the outside of the upper plate. After raising the mold to the highest position, tighten the inner nut and tighten, and then unscrew the upper nut, but firmly fix the upper plate.

2. If the mold is lower than the previous mold, the upper plate should be lowered to a suitable position. Unload the previous mold and replace it with a new one

3. Fix the upper mold to the upper plate with the fixing clamp iron.

4. Check and tighten all nuts to prevent them from loosening during operation.

Technical Parameters

 PS: Specifications subject to change without notice