Disposable Medical Virus Sampling Kit

Product Information

[Instructions]
1. According to sampling requirements, use sampling swabs to collect samples (for storage solutions without swabs, users can provide matching swabs by themselves).
2. Place the sampling swab after collecting the sample into the sampling tube.
3. Break the swab at the easy-break point of the sampling swab rod, discard the tail, and close the tube cap
4. Mark the information as required on the label of the sampling tube.
5. The specimen should be transported to the corresponding influenza surveillance network laboratory within 2 working days after collection, and the storage temperature is 2-8*C; if it cannot be delivered to the laboratory within 48 hours, it should be set at -70°C or below Save and ensure that the collected specimens are sent to the corresponding network laboratory within 1 week. Specimens should avoid repeated freezing and thawing.
6. Nasal swab, the collector holds the patient's mandible with his left hand, and gently inserts the swab into the nasal passage with his right hand, and then slowly rotates it for a while and then exits. Wipe the abnormal hole on the other side with another swab. Dip the swab head in the sampling liquid, squeeze the swab head in the sampling liquid several times, forcefully break off the tail of the swab, and discard the tail of the swab.
7. With a throat swab, press the patient's tongue with a tongue depressor with the left hand. Hold the swab in the right hand to wipe the bilateral pharyngeal tonsils and posterior wall of the pharynx, immerse the swab head in the sampling solution and squeeze the swab head in the sampling solution several times, forcefully break the tail of the swab, and discard the tail of the swab. The nasal and throat swabs can also be collected in the same sampling tube.

[Limitations of the test method]
This product is only used for the collection, transportation and storage of clinical virus samples.

[Precautions]
1. It is forbidden to directly contact the person being collected with the sampling liquid.
2. It is forbidden to soak the swab with the sampling solution before sampling.
3. This product is a disposable product, which is only used for the collection, transportation and storage of clinically collected virus specimens.
It must not be used for the intended purpose.
4. The product must not be used after the expiry date or the product packaging is damaged.
5. When collecting virus specimens, professionals should strictly follow the sampling procedures; when specimens are tested,
It should be operated in a laboratory that meets the safety level.
6. The specimen should be transported to the corresponding laboratory within 2 working days after collection, and the storage temperature is 2~8*C;
If it cannot be sent to the laboratory within 48 hours, it should be stored at -70°C or below, and the collected specimens should be guaranteed 1
Sent to the corresponding laboratory within a week. Specimens should avoid repeated freezing and thawing.

Product Details

	Disposable sampling swab The ultra-flexible plastic rod is ergonomically designed, The collection efficiency can be optimized and the patient's sampling comfort can be improved. Nylon flocking can strongly promote the absorption of liquid samples.
Sample collection tube The tube body and tube seal are made of polypropylene, The bottom is tapered, resistant to centrifugation and vibration. Built-in sample storage solution to prevent leakage.
	Individual package The entire swab and sampling tube are packed in a disposable sterile paper-plastic bag, Easy to use and avoid pollution.