5KW Three Phase Hybrid Power Storage System
Corigy 5KW three phase hybrid power storage system is not affected by the environment, etc. As long as there is the sun, it can generate electricity normally. This system utilizes both solar energy and battery storage to provide power to your home or business.
Model No.
CP-5KLP3-ON
Inverter
AC Output Voltage
220/380Vac,230/400Vac(three phase)
Output Frequency
50Hz±0.3Hz/60Hz±0.3Hz
Efficiency
>97.6%
Rated Output Power
5000W
Battery Voltage Range
40~60V
Rated PV Input Voltage
550V
Battery
Quantity
4Pcs or according to customer's request
Battery Type
lithium battery
Nominal Energy (Kwh)
5.12Kwh
Cycle Life
≥4000 times
Ingress Protection
IP65
PV Module
Brand
Jinko
Power
370W
Quantity
14Pcs
Dimensions
1692x1029x30mm
Mounting Structure
Material
Al6005-T5/ Steel (HDG,Zn-Al-Mg Coated) (According to customer's request)
Installation Place
Ground/Rooftop (According to customer's request)
Note: Product dimensions and physical appearance in this data sheet are nominal.Corigy Solar reserves the right to make the product changes from time to time,without prior notification, which may change the dimensions and/or physical appearance shown.
● MPPT efficiency up to 99.9%
● Parallel and split phase connection
● Power-saving mode, reducing no-load loss
● ON/OFF rocker switch for AC output control
● Complete protections for short circuit, overload, etc
● AC bypass and inverter output. Uninterrupted power supply
● Charging modes: Solar only/priority, Grid Priority and Hybrid
● LED/LCD Display for showing monitoring&instantaneous data
● Activation functions for AC Li-ion battery&PV, support lead-acid&Li-ion battery
● Intelligent adjustable speed span for high heat dissipation and longer working time
● Full digital closed-loop control of current. Advanced SPWM Technology with pure sine wave output.
● Large capacity:5.12KWH
● Long service life:≥4000times cycle life
● Resistant to high temperature and severe cold
● Match with inverter and has been tested before shipping
● Modular design of battery pack. Easy to transport, install and maintain
● Battery module configuration BMS to monitor the voltage, temperature, SOC and other data of the module.
●Jinko 370W
● Positive tolerance. Guaranteed tolerance +3%. Reliable power output
● High module efficiency. Module efficiency up to 15.7%. Cell efficiency up to18.5%
● Strong compressive strength. Certified to withstand high wind of 2400Pa and snow loads of 5400Pa
● Excellent performance under extreme condition. High salt mist and ammonia resistance
● Aluminum Alloy Frame, highly protect the module.
● Material: Al-6005-T5 or Steel (https://www.corigy.comHot dip galvanized/Zn-Al-Mg Coating)
● Installation place: ground, tile roof and metal roof
● Pre-assembly already which is easy installation and save labor cost
● Professional and free design, more flecibility and cost effective
● Excellent anti-corrosion, saving maintenance cost in later period
● Check and test strictly to against the extreme weather condition. Withstand max wind speed 60m/s and snow load 1.5m.