Bearings,as important components in contemporary mechanical equipment,mainly support the mechanical rotating body,which can reduce the friction coefficient during its movement and ensure its rotation accuracy.
6004,6004-2RS,6004-2Z Deep groove ball bearings are mainly used to support radial loads, but they are also commonly used to support combined radial and axial loads.
150-0909 bearings are used in the reduction gearbox system of Caterpillar heavy machinery equipment:
1500909 BEARING Caterpillar parts fit:303, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304D CR, 304E
1.109-00033 bearings are used in the final drive bearing system of Doosan Heavy Machinery Equipment:
1.109-00033 BEARING;ANGULAR BALL Doosan parts:DX140LC,DX140LC-3 / DX160LC-3,DX160LC,DX180LC-3,DX180LC-5
The radial and axial clearance can be adjusted during installation and use; The large cone angle mainly bears the axial and radial combined loads, which are mainly axial loads. Generally, it is not used alone to support pure axial loads. When configured in pairs (installed with the same name opposite).
F686ZZ bearing is a flanged ball bearing made of chrome steel in which the bearing is metal shield from both sides It has an 6mm inner diameter, a 13mm outer diameter, a 5mm thickness, and an 15mm flange.
MR148ZZ Miniature Shielded Bearing 8mm x 14mm x 4mm, the inner diameter is 8mm, outer diameter is 14mm and the width is 4mm, Bearing is made of Chrome Steel, each bearing has 2 Metal Sheilds to protect the bearing from dust or any possible contamination, also bearing is pre-lubricated with grease.