6009ZZ Deep Groove Ball Bearing, Single Row, Open, Pressed Steel Cage,high quality is a high-precision premium quality deep groove shielded 45x75x16 ball bearing made to ABEC 3 precision standards. What sets this 6009ZZ bearing apart from others is the ABEC 3 precision standard that this bearing is made to, the grade 10-balls used, and the superb electric motor quality rating (EMQ). ABEC 3 means that the bearing itself has a micron deviation from a nominal of 20.000mm of -8 micrometers. The standard ABEC 1 precision standard that almost all ball bearings are made to today has a deviation of -10 micrometers. In simple terms, the more precision a bearing is, the better it will perform in any given application. The grade 10 balls within this bearing are typically only found within ABEC 5 or higher bearings because of their more true roundness and precision. The balls within a bearing share the load capacity, so this also increases the working life versus the standard grade 25 balls used in other brands. The electric motor quality rating means that the bearing must operate at an extremely low noise level with minimal to no vibration. To achieve this, the 6009ZZ bearing features raceways that are precision honed to a superb finish.
More specifically, 6009ZZ deep groove ball bearings are found in a wide range of industrial and automation applications. They are designed to reduce rotational friction and support loads. The load is spread evenly across the grade 25 balls and as the inner bearing race rotates so do the balls. The metal shields located on each side of the ball bearing keep the bearing lubricant in while keeping unwanted contents out. For additional information or to get a quote on a 6009ZZ bearing contact our customer support team and we will be happy to assist you!
| Bearing Type | Ball |
| For Load Direction | Radial |
| Construction | Single Row |
| Seal Type | Shielded |
| Part Number | 6009ZZ |
| For Shaft Diameter | 45mm |
| Bore Dia (d) | 45mm |
| Bore Dia Tolerance | -0.008mm to 0 |
| For Housing ID | 75mm |
| Outer Dia (D) | 75mm |
| Outer Dia Tolerance | -0.008mm to 0 |
| Width (B) | 16mm |
| Width Tolerance | -0.12mm to 0 |
| Ring Material | 52100 Chrome steel |
| Ball Material | 52100 Chrome steel |
| Cage Material | 300 Series Stainless Steel |
| Shield Material | 300 Series Stainless Steel |
| Dynamic Load Rating (Cr) (Newtons) | 21000 |
| Static Load Rating (Cor) (Newtons) | 15100 |
| Max Speed (Grease) (X1000 RPM) | 9.2 |
| Max Speed (Oil) (X1000 RPM) | 36 |
| Lubrication | Required |
| Shaft Mount Type | Press Fit |
| Temperature Range | -30° to 110 °C |
| ABEC Rating | ABEC-3 |
| Radial Clearance Trade No. | C0 |
| Radial Clearance | 0.003mm to 0.018mm |
| RoHS | Compliant |
| Ball Qty | 12 |
| Ball Dia | 8.731mm |
| Weight (grams) | 245 |
1 Applicable only for open, single Z, ZZ, single RU and 2RU types in inner ring rotating conditions. Max. speeds for the contact rubber seal(s) types will be around 50-60 % of above values.
2 Applicable only for open, single Z, ZZ, single RU and 2RU types in inner ring rotating conditions. Max. speeds for the contact rubber seal(s) types will be around 50-60 % of above values.
Request for Quotation
