Hub Wheel Bearing Specification :

Auto hub wheel bearing is the main purpose of bearing and to provide accurate guide to the rotation of the wheel hub, it is under axial load and radial load, is a very important component.It is developed on the basis of standarded angular contact ball bearings and tapered roller bearings.

Greased and sealed for life, the first generation wheel hub bearing cuts installation time and virtually eliminates problems caused by improper seal handling and bearing clearances. It is often equipped with a seal, on one side of the bearing unit, including an integrated magnetised ABS impulse wheel.

38BWD12 Angular Contact Ball Bearings Specification:

Bearing number : 38BWD12
Bore Diameter (mm) : 38
Outer Diameter (mm) : 72
Width (mm) : 36
Material: Chrome steel Gcr15

Weight :0,56 Kg

OEM NO.:
38BWD12,90363-38006 77,903633800677,FW128,510007,510007,0513980,412.44001,WE60945,VKBA1191

Application For : 
TOYOTA YARIS, VIOS,RENAULT

We Can Produce Other Auto Wheel Bearing:

Application of Hub Wheel Bearing: 

Auto hub wheel bearing have taper roller bearings and angular contact ball bearings, single row and double row taper roller usually use in front wheel hub bearings. Car wheel bearings installed in the car wheel hub unit,it is aim to improve the wheel bearing performance,wheel bearings from the early two single row taper roller bearings developed to double row taper roller bearings and double row angular contact ball bearing, but also from a simple bearing development in the core of the bearing hub bearing units. Other double row taper roller bearings use in cars and any other machinery

Widely used in car, vehicle, automobile cooling water pump, in textile machinery, engineering machinery, etc.