40mm x 51.8mm x 8mm K518KH8 ,TH-073,MR110, MR127 bike bearings are produce with Chrome steel Gcr15 ,we can provide free sample for you test .
40mm x 51.8mm x 8mm K518KH8 ,TH-073,MR110, MR127 bike bearings are produce with Chrome steel Gcr15 ,we can provide free sample for you test .
1-1/2" Headset Bicycle Bearing K518KH8 ,TH-073,MR110, MR127 Specification :
Angle / Chamfer (Deg): 36 / 45
Bearing ID: 40.00mm
Bearing OD: 51.8mm
Bearing Thickness: 8.0mm
Internal Angle: 36 Degrees
External Angle: 45 Degrees
Material: Bearing Steel
Cage Material: Nylon PA66
Grease: Mobil XHP-222 or SINOPEC HTHS Bearing Grease
Seal: Double-sealed 2RS
We can Produce other Bike Bearings for you:
| Bearing No. | Dimension (mm) | Bearing No. | Dimension (mm) |
| K945H6.3 | 27.15×38.0×6.3 45°/45° | K3544H5 | 35.00×44.0×5.0 45°/45° |
| K936H6.5 | 27.15×38.0×6.5 36°/45° | K3547H7 | 35.00×47.0×7.0 45°/45° |
| K3039H6.5 | 30.15×39.0×6.5 45°/45° | K3547H8 Ω | 35.00×47.0×8.0 45°/45° |
| K345H6.5 | 30.15×41.0×6.5 45°/45° | K37469H6.5 | 37.00×46.9×6.5 45°/45° |
| K345H7 Ω | 30.15×41.0×7.0 45°/45° | K3749H6.5 | 37.00×49.0×6.5 45°/45° |
| K345H7.7 | 30.15×41.0×7.7 36°/45° | K3749H7 | 37.00×49.0×7.0 45°/45° |
| K336H6.5 ◊ | 30.15×41.0×6.5 36°/45° | K3748H7 | 37.00×48.0×7.0 45°/45° |
| K336KH6.5 | 30.15×41.0×6.5 36°/36° | K4051H7 | 40.00×51.0×7.0 45°/45° |
| K845H6.5 | 30.15×41.8×6.5 45°/45° | K515H7 | 40.00×51.5×7.0 45°/45° |
| K845H7 | 30.20×41.8×7.0 45°/45° | K518H8 Ω | 40.00×51.8×8.0 45°/45° |
| K845H8F ΩŠ | 30.50×41.8×8.0 45°/45° | K518KH8 Ω◊ | 40.00×51.8×8.0 36°/45° |
| K845H8 Ω | 30.50×41.8×8.0 45°/45° | K519H8 Ω | 40.00×51.9×8.0 45°/45° |
| K845H7.7 Ω | 30.50×41.8×7.7 45°/45° | K4052H6.5 | 40.00×52.0×6.5 45°/45° |
| K418H6 Ω | 32.70×41.8×6.0 45°/45° | K4052KH6.5 ◊ | 40.00×52.0×6.5 36°/45° |
| K32483H7 | 32.40×43.8×7.0 45°/45° | K4052H7 | 40.00×52.0×7.0 45°/45° |
| K3344H5 | 33.00×44.0×5.0 45°/45° | K4052H8 | 40.00×52.0×8.0 45°/45° |
| K34468H7 | 34.10×46.8×7.0 45°/45° | K4052H12 Ω | 40.00×52.0×12.0 45°/45° |
| K34469H7 | 34.10×46.9×7.0 45°/45° |
Ω:means one side seal
Š :means inner rings with step
◊:means inner rings with black coloe
For material we can produce with ：Chrome Steel(GCr5);Stainless Steel(9Cr15/s440);Ceramic(Si3N4,ZrO2);
Cage:Nylon66;
Special grease;
Seals/Sheild(NBR/SPCC)
Welcome with your enquiry ,we can provide free sample before order .
Request for Quotation
